EmpoweringTransformation

Bächli is a Swiss tech company that specialises in the development and production of electrotechnical components. The company’s range of products comprises highly specialised transformers, chokes and wound products of all kinds that are used in differing industrial products. The company is based in Kriens near Lucerne and has a proud history of successfully partnering with international industrial companies that spans over 75 years.

Bächli World
Mobility
Railway
Mountain railway
Bus
Ropeways
Ship
Tram
Metro
Shunting vehicle
Industry
Factory
Infrastructure
Railway Station Infrastructure
Planning Office
Wind Power
Nuclear Power Station
Telecommunications
Tunnel Construction
Solar Technology
Waterworks
Medtech
Mobility
Railway
Mains choke
Mains choke
very compact design
weight-optimised,
high initial inductance
2 rated operating points
Shock & vibration testing according to 61373
Fire protection EN45545
  • Filtering of faults
  • Current limiting to prevent overload
  • Voltage stabilisation
  • Improving energy efficiency
  • Ensuring electrical compatibility
Matching transformer
Matching transformer
fast availability
Shock & vibration testing according to 61373
Fire protection EN45545
  • Voltage conversion
  • Frequency adjustment
  • Current limitation and current control
  • Insulation and protection
  • Improving energy efficiency
Underfloor system
Underfloor system
Available as a system box with built-in transformer, filter or choke
  • Compact design
  • Weight-optimised
  • temperature-optimised,
  • integrated overvoltage protection,
  • maintenance-free
  • Shock & vibration testing according to 61373
  • Fire protection EN45545
  • Welding approval according to EN50185
LCL filter
LCL filter
Shock & vibration testing according to 61373
Fire protection EN45545
  • Harmonic filtering
  • Voltage smoothing
  • Improvement of the power factor
  • EMI filtering
  • Protection against network perturbations
Roof box system
Roof box system
low noise emission,
optimised cooling;
weight-optimised
maintenance-free
Shock & vibration testing according to 61373
FEM simulation according to EN 61330;
Welding approval according to EN50185
  • Available as a system box with built-in transformer, filter or choke
Isolating transformer/ socket outlet transformer
Isolating transformer/ socket outlet transformer
compact design
Fast availability
low maintenance
with fire protection EN45545
Shock & vibration testing according to 61373
Available with push-in terminals for easy installation
  • Electrical insulation
  • Electrical isolation
  • Protection against electrical interference
  • Voltage conversion
Suction throttle
Suction throttle
Shock & vibration testing according to 61373
Fire protection EN45545
  • Pressure regulation
  • Braking force control
  • Increased safety by preventing loss control
  • Improved energy efficiency
Air throttle
Air throttle
Low maintenance
Linear behaviour
Fixed short-circuit current
Shock & vibration testing according to 61373
Fire protection EN45545
  • Pressure regulation
  • Support for controlling the brake pressure
  • Increased safety by preventing loss control
  • Pressure stability
Battery charging choke
Battery charging choke
Shock & vibration testing according to 61373
Fire protection EN45545
  • Overcharge protection
  • Current limitation
  • Stabilisation of the charging process
  • Protection against reverse current
  • Support for compatibility with chargers
Auxiliary converters
Auxiliary converters
Shock & vibration testing according to 61373
Fire protection EN45545
  • Voltage transformation
  • Power supply for emergency devices
  • Voltage matching
  • Isolation through protection
  • Improvement of energy efficiency
Sine filter
Sine filter
good damping
Low heating
Shock & vibration testing according to 61373
Fire protection EN45545
  • Reduction of harmonic distortion
  • Improvement of power quality
  • Protection from interference
  • Compliance with regulations
  • Optimising the performance of electrical systems
Starpointmaker
Starpointmaker
Compact design
Shock & vibration testing according to 61373
Fire protection EN45545
  • Correct dimensioning of the neutral conductor
  • Avoidance of overload
  • Reduction of neutral conductor currents
  • Improving the safety and reliability of the electrical system
Mountain railway
DC Mains Choke
DC Mains Choke
Shock and vibration testing according to EN 61373
Partial discharge type and routine test
Additionally, burst wave type and routine testing
  • Overhead line network choke for damping resonances, harmonics, and current limitation
  • Energy storage during overhead line icing
  • Damping during regenerative braking
Isolating Transformer / Socket Outlet Transformer
Isolating Transformer / Socket Outlet Transformer
With fire protection according to EN 45545
Shock and vibration testing according to EN 61373
  • Electrical isolation for the use of RCDs (residual current devices) downstream of frequency converters
  • Protection against electrical disturbances
  • Voltage conversion
  • Compact design
  • Fast availability
  • Low maintenance
  • Available with push-in terminals for easy installation
Isolating Transformer
Isolating Transformer
With fire protection according to EN 45545
Designed for an altitude of up to 2000 meters above sea level
  • Electrical isolation
  • Potential separation
  • Protection against electrical disturbances
  • Voltage conversion
1-phase Choke
1-phase Choke
With fire protection according to EN 45545
Designed for an altitude of up to 2000 meters above sea level
Shock and vibration testing according to EN 61373
  • Filtering of disturbances
  • Current limitation to prevent overload
  • Voltage stabilization
  • Improvement of energy efficiency
  • Ensuring electrical compatibility
Bus
Decoupling Unit
No legally binding standards, use of railway standards
EN 60310
  • Decoupling module for inverter units
  • Compact design
  • Weight optimized
  • Temperature optimized
DC-Choke
DC-Choke
Shock and vibration testing according to EN 61373
Fire protection according to EN 45545
EN 60310
  • Inverter applications
  • Grid damping
  • Low maintenance
  • Linear behavior
  • Short-circuit current proof
Isolating Transformer / Socket Outlet Transformer
Isolating Transformer / Socket Outlet Transformer
Fire protection according to EN 45545
Shock and vibration testing according to EN 61373
EN 60310
  • Electrical isolation
  • Potential separation
  • Protection against electrical disturbances
  • Voltage conversion
  • Compact design
  • Fast availability
  • Low maintenance
  • Available with push-in terminals for easy installation
LCL-Filter
LCL-Filter
EN 60310
EMV: EN 50125
  • Mains and harmonic filter
Ropeways
Isolating transformer
Isolating transformer
Isolation transformer: IEC 61558-2-4

alternative autotransformer: IEC 61558-2-13
  • Safe and stable power supply
  • Reduction of ground loops and interference voltages
  • Protection against voltage fluctations and power disturbances
  • Voltage adaptation for drive systems
  • Galvanic isolation and safety
Transformer
Transformer
IEC 61558-2-4
  • Transmission of electrical signals from one circuit
  • Filtering of interference
  • High-frequency applications
  • Signal transmission and adaptation
3-phase isolating transformer with grain-oriented low-loss core
3-phase isolating transformer with grain-oriented low-loss core
IEC 61558-2-4
  • Long-distance energy transmission (1000V)
  • Protect systems through galvanic isolation (integrated in enclosure)
  • Efficiency
  • High efficiency
Ship
Isolating Transformer
Isolating Transformer
Connection: YNyn0d5
Rated frequency: 60Hz
Standard: EN61558-2-4, LLoyds IEC61376, IEC61373
  • Efficient energy distribution and supply
  • Mechanically robust and reliable power supply solution
  • Isolation between power generators and battery systems
  • Filter
  • Saltwater resistant
Main transformers for harbour facilities
Main transformers for harbour facilities
  • Galvanic isolation for shore-to-ship power supply
Tram
3-phase Isolating Transformer
3-phase Isolating Transformer
EN60310
EN45545
  • Galvanic isolation to reliably supply power to the different onboard devices.
DC-Choke
DC-Choke
EN60310
EN45545
  • For inverter applications
  • Energy storage
  • Filter for interference suppression
Choke
Choke
EN60310
EN45545
  • Common-mode filter
  • Symmetry choke
  • Bandpass filter
Metro
Phase Choke
EN 60310
EN 45545
  • Special choke coil for regulating current fluctuations
  • For filtering disturbances
1-phase Filter Choke
1-phase Filter Choke
According to standard EN60310
EN45545
  • For regulating voltage fluctuations and frequency ripple
  • Compact design
2-phase Isolating Transformer
2-phase Isolating Transformer
EN45545
EN60310
  • Galvanic isolation
  • stable voltage supply in two-phase systems
  • Compact design
Shunting vehicle
3-phase isolating transformer with reinforced mounting system for cross-load direction of travel, loss-optimized in SMART-ε-POWER technology
3-phase isolating transformer with reinforced mounting system for cross-load direction of travel, loss-optimized in SMART-ε-POWER technology
EN60310
Strength analysis
Fire protection, etc.
  • High load capacity
  • Excellent energy efficiency
  • High level of safety
  • Ideal for harsh operating environments
  • Optimized performance under load
3-phase Isolating Transformer
3-phase Isolating Transformer
EN 60310
EN 45545
  • Safe power supply for onboard electrical systems such as drive units and control systems
  • Compact design
1-phase Choke
1-phase Choke
EN 60310
EN 45545
  • Reduction of current fluctuations
  • Filtering of interference signals
  • Custom-made solutions
  • Small production quantities
Industry
Factory
1-PHASE CONTROL TRANSFORMER
1-PHASE CONTROL TRANSFORMER
IEC61558-2-2
Standard, available within 24 hours,
UL5085/cat. XPTQ2
CSA22.2/cat. XPTQ7
  • Safe mains isolation for control circuits
1-PHASE SAFETY & ISOLATION TRANSFORMER
1-PHASE SAFETY & ISOLATION TRANSFORMER
IEC61558-2-4/6
  • Increased operational safety guaranteed
  • Fault current risk reduced
  • Long-lasting device protection
1-PHASE SINUS FILTER BROADBAND UP TO 21ST HARMONIC
1-PHASE SINUS FILTER BROADBAND UP TO 21ST HARMONIC
IEC61558-2-20
customized, harmonics, LC filter with discharge resistor
  • Clean power supply
  • EMC compliance
  • Interference-free system operation
NETWORK FILTER, COMPENSATION FILTER
NETWORK FILTER, COMPENSATION FILTER
IEC61558-2-20
UL5085/cat. XPTQ2
CSA22.2/cat. XPTQ7
  • Harmonics
  • Switching frequencies
  • Compensation of drive converters
3-PHASE SAVING TRANSFORMER IN HOUSING / INDUSTRIAL CABINET IP23
3-PHASE SAVING TRANSFORMER IN HOUSING / INDUSTRIAL CABINET IP23
IEC61558-2-13
customized, UL5085/cat. XPTQ2
CSA22.2/cat. XPTQ7
  • Cost-effective adjustment of the mains voltage
  • Installed in a housing
1-PHASE CONTROL TRANSFORMER
1-PHASE CONTROL TRANSFORMER
IEC61558-2-2
Standard, available within 24 hours,
UL5085/cat. XPTQ2
CSA22.2/cat. XPTQ7
  • Safe mains isolation for control circuits
  • Trouble-free operational reliability
3-PHASE ISOLATION TRANSFORMER IN HOUSING / INDUSTRIAL CABINET IP23
3-PHASE ISOLATION TRANSFORMER IN HOUSING / INDUSTRIAL CABINET IP23
IEC61558-2-4
customized, UL5085/cat. XPTQ2
CSA22.2/cat. XPTQ7
  • Galvanic isolation between two circuits
  • Adjustment of the mains voltage
  • Installed in a housing
3-PHASE ISOLATION TRANSFORMER WITHOUT & WITH IP23 HOUSING
3-PHASE ISOLATION TRANSFORMER WITHOUT & WITH IP23 HOUSING
IEC 61558-2-4
customized, UL5085/CSA22.2, cat. XPTQ2/8
  • Galvanically isolated
  • Flexible adjustment of mains voltages
  • Compact complete solution in housing
3 PHASE UNIVERSAL ISOLATION TRANSFORMER
3 PHASE UNIVERSAL ISOLATION TRANSFORMER
IEC 61558-2-4
UL5085/CSA22.2, cat. XPTQ2/8
  • Flexible voltage adjustment worldwide
  • Simplified purchasing process
3-PH. ISOLATION /SAVING TRANSFORMER AS SMART E-POWER TECHNOLOGY WITH MINIMAL LOSSES
3-PH. ISOLATION /SAVING TRANSFORMER AS SMART E-POWER TECHNOLOGY WITH MINIMAL LOSSES
IEC 61558-2-4 / -13
SMART-E Power, customized, energy cost savings, etc.
  • Ideal for continuous operation
  • Efficient and cost-saving
  • 99 percent efficiency
  • Long-term energy savings
3-PHASE NETWORK CHOKE
3-PHASE NETWORK CHOKE
IEC 61558-2-20
UL5085/CSA22.2, cat. XPTQ2/8
customized
  • Filtering of interference/harmonics
  • Current limitation to prevent overload
  • Voltage stabilization
1-PHASE SAVING TRANSFORMER
1-PHASE SAVING TRANSFORMER
IEC 61558-2-13
cost savings, customized
  • Cost-effective solution without galvanic isolation
  • Flexible voltage adjustment worldwide
  • Simplified purchasing process
1-PHASE CHOKE
1-PHASE CHOKE
IEC 61558-2-20
Printed circuit board assembly and potting
  • Compact single-phase printed choke
  • High EMC performance
  • Robust and reliable
1-PHASE CHOKE
1-PHASE CHOKE
IEC 61558-2-20
UL5085/cat. XPTQ2
CSA22.2/cat. XPTQ7
  • High current carrying capacity
  • UR CSA certified
1-PHASE ISOLATION TRANSFORMER IN HOUSING
1-PHASE ISOLATION TRANSFORMER IN HOUSING
IEC 61558-2-4
UL5085/cat. XPTQ2
CSA22.2/cat. XPTQ7
IP20-67
  • Worldwide voltage compatibility
  • Integrated IP23 protection class
  • UL-certified component
  • Ready to connect with cable
POWER SUPPLY FULLY ASSEMBLED & WIRED
POWER SUPPLY FULLY ASSEMBLED & WIRED
IEC 61558-2-6
  • Multi-output power supply
  • Stabilized DC output
  • Delivered fully assembled
Infrastructure
Railway Station Infrastructure
1-PHASE SAVING TRANSFORMER
1-PHASE SAVING TRANSFORMER
EN 61558-2-13
  • Very compact design
  • Weight-optimised
  • Cost-saving
1-PHASE ISOLATION TRANSFORMER
1-PHASE ISOLATION TRANSFORMER
EN 61558-2-4
  • Ideal connection options
  • Compact design
1-PHASE SAFETY TRANSFORMER
1-PHASE SAFETY TRANSFORMER
EN 61558-2-6
  • Safety isolation of low-voltage signals
1-PHASE SIGNAL TRANSFORMER WITH NIGHT-TIME VOLTAGE REDUCTION
EN 61558-2-4
  • Signal transformer with voltage variation and night-time voltage reduction
1-PHASE HIGH-VOLTAGE TRANSFORMER
1-PHASE HIGH-VOLTAGE TRANSFORMER
EN 61558-2-4
  • 3000V power transmission up to 40 km; parallel feed-in along the line for 230V consumers
POWER LINE CHOKE
POWER LINE CHOKE
EN 61558-2-20
  • 2/4/6% mains chokes
  • Linear inductance curve
  • 125% overload
1-PHASE AC ISOLATING TRANSFORMER FOR UPC WITH 50 MV DC BASIS
1-PHASE AC ISOLATING TRANSFORMER FOR UPC WITH 50 MV DC BASIS
EN 61558-2-4/ -2-10
EN 50124-1
  • Energy-efficient
  • Low short-circuit voltage
  • Easy to connect
3-PHASE ISOLATION TRANSFORMER WITH OR WITHOUT A HOUSING
3-PHASE ISOLATION TRANSFORMER WITH OR WITHOUT A HOUSING
EN 61558-2-4
  • Energy efficiency SMART-E-POWER
  • 50 kVA
  • Continuous overload capacity 80 kVA
  • Minimal noise
1-PHASE ISOLATION TRANSFORMER
1-PHASE ISOLATION TRANSFORMER
EN 61558-2-4
  • Various voltage taps
  • Energy-efficient
  • Open design for fixed installation
Planning Office
CONSULTATIONS
CONSULTATIONS
  • Product Development & Engineering
  • Project Management
REPAIRS & RECREATIONS
REPAIRS & RECREATIONS
  • Repairs or replacements of defective wound goods
  • Damage analysis
SIMULATION & TESTING
SIMULATION & TESTING
  • Type test for all products
  • Vibration tests, strength analyses, environmental tests, electrical stress tests, EMC
TRAINING COURSES
TRAINING COURSES
  • Technical training on our products
Wind Power
ISOLATION & DISTRIBUTION TRANSFORMERS (SMART-E-POWER)
ISOLATION & DISTRIBUTION TRANSFORMERS (SMART-E-POWER)
EN 61558-2-4
  • Extremely energy-efficient and compact
  • Energy-efficient (SMART-E-POWER)
  • 50 kVA
  • Continuous overload capacity: 80 kVA
  • Minimal noise
POWER LINE CHOKE
POWER LINE CHOKE
EN 61558-2-20
  • 2/4/6% mains chokes
  • Linear inductance curve
  • 125% overload
POWER INPUT FILTERS & MULTI-STAGE OUTPUT FILTERS, POWER SUPPLY NOISE SUPPRESSION
  • On request
MAINS VOLTAGE STABILISERS (1-PHASE & 3-PHASE)
MAINS VOLTAGE STABILISERS (1-PHASE & 3-PHASE)
EN 61558-2-14
  • Voltage regulation within +/- 30%
  • Mains voltage fluctuations
DC POWER SUPPLIES & BUFFER CAPACITORS FOR PITCHER SYSTEMS
DC POWER SUPPLIES & BUFFER CAPACITORS FOR PITCHER SYSTEMS
EN 61558-2-4/6
  • Robust and compact DC power supply in a discrete design (can also be used as a charger with a battery)
REDUNDANT DC MAIN POWER SUPPLIES WITH BATTERY CONNECTION
REDUNDANT DC MAIN POWER SUPPLIES WITH BATTERY CONNECTION
EN 61558-2-4/6
  • Robust and compact DC power supply in a discrete design, suitable for parallel operation
Nuclear Power Station
DISCRETE DC POWER SUPPLY
DISCRETE DC POWER SUPPLY
Shock and vibration testing,
climate-tested at 95% relative humidity,
-30°C to +70°C"
  • Earthquake-proof
  • Radiation-proof
  • Interference-resistant (EMC)
  • Schottky technology
MAINS VOLTAGE STABILISERS (1-PHASE & 3-PHASE)
MAINS VOLTAGE STABILISERS (1-PHASE & 3-PHASE)
EN 61558-2-14
  • Voltage stabilisation within a range of +/- 30% of mains voltage fluctuations
ISOLATION & DISTRIBUTION TRANSFORMERS (SMART-E-POWER)
ISOLATION & DISTRIBUTION TRANSFORMERS (SMART-E-POWER)
  • Extremely energy-efficient and compact
  • Energy-efficient (SMART-E-POWER)
  • 50 kVA
  • Continuous overload capacity 80 kVA
  • Minimal noise
POWER INPUT FILTERS & MULTI-STAGE OUTPUT FILTERS, POWER SUPPLY NOISE SUPPRESSION
  • On request
Telecommunications
DC POWER SUPPLY
DC POWER SUPPLY
EN 61558-2-4/6
  • Robust and compact DC power supply in a discrete design (can also be used as a charger with a battery)
3 PHASE ISOLATION TRANSFORMER
3 PHASE ISOLATION TRANSFORMER
EN 61558-2-4/6
  • High-voltage isolation up to 20 kV
MAINS FILTER CHOKE
MAINS FILTER CHOKE
EN 61558-2-20
  • 2/4/6% mains chokes
  • Linear inductance curve
  • 125% overload
SINUS FILTER
SINUS FILTER
EN 61558-2-20
  • Decoupling of power grid harmonics and remote control signals
Tunnel Construction
3-PHASE AUTOTRANSFORMER IN AN ENCLOSURE
3-PHASE AUTOTRANSFORMER IN AN ENCLOSURE
EN 61558-2-4
  • 1000V step-up transformer as a power-saving transformer
  • No galvanic isolation required
  • Energy-efficient (SMART-E-POWER)
  • Modular sheet steel housing
  • IP23
  • Equipped with switching and fuse components
3-PHASE ISOLATION TRANSFORMER IN A CABINET
3-PHASE ISOLATION TRANSFORMER IN A CABINET
EN 61558-2-4
  • 1000V step-down transformer
  • Energy-efficient (SMART-E-POWER)
  • Enclosed cabinet
  • IP65
  • Fitted with switching and fuse components
VOLTAGE REGULATOR FOR LONG-DISTANCE TRANSMISSION
VOLTAGE REGULATOR FOR LONG-DISTANCE TRANSMISSION
EN 61558-2-14
  • Stabilised output voltage independent of tunnel distances
1-PHASE ISOLATION TRANSFORMER
1-PHASE ISOLATION TRANSFORMER
EN 61558-2-4
  • Robust
  • Lightning-resistant
  • EMC-decoupling
MAINS FILTER CHOKE
MAINS FILTER CHOKE
EN 61558-2-20
  • 2/4/6% mains chokes
  • Linear inductance curve
  • 125% overload
Solar Technology
3-PHASE SINUSOIDAL FILTER FOR SOLAR INVERTERS
3-PHASE SINUSOIDAL FILTER FOR SOLAR INVERTERS
EN 61558-2-20
  • Low-pass filter effect
  • Wall-mounted
  • Total harmonic distortion (THDI) up to 20%
  • 2-stage LC filter
3-PHASE ISOLATION TRANSFORMER
3-PHASE ISOLATION TRANSFORMER
EN 61558-2-4
  • SMART-E-Power technology
  • Extremely low-loss grid connection
  • Efficiency of over 99.5% possible
Waterworks
3-PHASE ISOLATION TRANSFORMER
3-PHASE ISOLATION TRANSFORMER
EN 61558-2-4
  • Fault and surge protection
3-PHASE EXCITATION TRANSFORMER
3-PHASE EXCITATION TRANSFORMER
EN 60076
  • Low maintenance
  • More moisture-resistant
  • Galvanic isolation & EMC decoupling
GENERATOR EXCITATION TRANSFORMER
GENERATOR EXCITATION TRANSFORMER
EN 61558-2-4/6
  • 125% overload capacity
  • Robust construction with additional rust protection
Medtech